| Crown |  |
Crown XLS Series (XLS 202, XLS 402, XLS 602, XLS 802)
The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of four models in a uniform, rugged 2U chassis, incorporating the best of tried and true design principles and innovative features.
The four models in the series are the XLS-202, XLS-402, XLS-602, and XLS-802. They are identical except for output power and weight. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirements—reliably and within budget. Every XLS Series amplifier is backed by Crown's unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLS Series. They are a powerful argument for quality and value!
- Housed in a rugged, all-steel 2U chassis
- Efficient forced-air fans prevent excessive thermal buildup
- Electronically balanced XLR inputs; touch proof binding post and Speakon® outputs
- Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Crown CTs Series
Crown’s CTs Series amplifiers provide exceptional performance, flexibility and value for installed sound applications. CTs Series amplifiers feature independent selection of high and low impedance operation for a specific channel, plus power levels and features that were carefully chosen to match the requirements of fixed install design. Easy integration with HiQnet™ and CobraNet™ allows CTs amplifiers to deliver a comprehensive lineup of monitoring and control features along with digital audio transport for an award-winning digital audio solution.
- High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
- Crown Switching Power Supply for lighter weight
- Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
- 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
- Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability
- 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
- Comprehensive array of indicators provide accurate diagnostics
- Two-channel models are fully PIP2-compatible. Multi-channel models accept MC
| DBX |  |
dbx DriveRack Studio
The dbx Professional Products DriveRack Studio provides all of the tools necessary to optimize Studio Monitor management in a single rack mount chassis design regardless of the environment. The DriveRack Studio offers dual XLR inputs and six XLR outputs, dual channel graphic EQ, classic dbx Compression, multiple crossovers, parametric EQ and a built-in real time audio analyzer. In addition, this audio toolbox provides the end user with 24 custom presets that have been specifically written and designed to work in tandem with the most popular studio reference monitors available. The DriveRack Studio now allows you to fine-tune even the most sonically challenged rooms.
The DriveRack Studio continues the legacy of DriveRack series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years. The DriveRack Studio was designed with the purpose and vision of providing state-of-the-art signal processing in the studio environment, while utilizing a simple and intuitive user interface. This goal has been achieved by offering two independent channels of processing power with a linkable 28-Band Graphic equalizer, industry-standard dbx® stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a six channel output system that includes parametric EQs, and Peak Plus™ limiters (which are used to provide protection against speaker blowouts) and alignment delay. These features combined with the Wizard setup system, represent a methodical design that is guaranteed to deliver optimal, all-inclusive processing in a completely scalable system.
DBX 2231 Dual 31-Band Graphic Equalizer
The 20-Series Graphic Equalizers feature revolutionary instant encode/decode dbx Type III Noise Reduction in-circuit at the push of a button. They increase S/N ratio by up to 20dB. Other features include a limited threshold range from 0dBu to +24dBu (off) that can transparently tame wild hits and nuances, Type III noise reduction, and the PeakPlus Limiter. Four segment LED bargraph for both gain reduction and output level offers comprehensive visual feedback. 20-Series applications include front of house PA equalization, studio monitor room connection, and permanent sound reinforcement installations.
- Switchable boost/cut ranges of ±6 or ±15 dB
- Electronically balanced/unbalanced inputs
- Servo balanced/unbalanced outputs
- XLR, barrier strip, and 1/4" TRS connectors
- 12 dB/+12 dB input gain range
DBX RTA-M Microphone
The RTA-M by dbx is an omni-directional, flat frequency measurement microphone specially designed for the Driverack series to pick up all frequencies from 20 Hz to 20 kHz , ensuring accurate "pinking"/real-time analysis of your audio. It runs on 15 volts of phantom power (supplied by the Driverack units) and comes with a clip and case. A great tool for live sound or contract installs.
- Flat frequency response for accurate audio analysis
- Omni-directional Polar Pattern
| Lexicon |  |
Lexicon MX200
The MX200 has a user interface that is equally at ease in the studio or concert hall, with a unique VST software interface via USB connection to recording programs, offering high flexibility and the classic Lexicon sound.
The MX200 Dual reverb/effects processor. This new single rack-space, two-channel unit combines an intuitive front-panel design with a unique USB connection and VST interface for use with software recording platforms. Featuring a wide array of the rich, complex reverb algorithms Lexicon is noted for, with delays, effects and dbx dynamics, MX200 is the perfect package for the home studio or the concert hall. In any application, the MX200 offers versatility and instantly accessible reverb, dynamics and special effects with the signature Lexicon sound.
The MX200 brings Lexicon's world-class effects into any studio or live venue in a neat, single rack-space package, along with a unique VST user interface and convenient USB connection.
- 16 legendary Lexicon reverbs
- Lexicon delays & mod effects
- dbx compressor & de-esser
- VST plug-in & editor software
- "Hardware plug-in" mode
- Dual-processor design
- 4 routing configurations
- 99 factory / 99 user programs
- S/PDIF digital inputs / outputs
- 24 bit, 44.1kHz / 48kHz
